Firmware - Dwi259eti

void my_feature_task(void *arg)

while (1) float temp; if (my_feature_get_temperature(&temp) == 0) ESP_LOGI(TAG, "Temp = %.2f°C", temp); // Optionally publish via MQTT vTaskDelay(pdMS_TO_TICKS(10000)); // 10 s interval

static const char *TAG = "my_feature";

If the feature is periodic, spawn a FreeRTOS task: Dwi259eti Firmware

// registration – called from at_init() void at_register_my_feature(void)

Keeping the sensor‑reading code isolated makes unit‑testing easier and prevents the AT parser from becoming a monolith. 4.3 Glue Layer – AT Command (if applicable) // at_cmd_myfeat.c #include "at.h" #include "my_feature.h"

at_register_command("AT+TEMP?", at_cmd_temp_handler, AT_CMD_TYPE_QUERY); void my_feature_task(void *arg) while (1) float temp; if

Add the registration call in the AT subsystem init routine (often at_init.c ). If the feature needs user‑configurable thresholds:

/* Example: read a temperature sensor on I2C address 0x48 */ int my_feature_get_temperature(float *temp_c) raw[1]; *temp_c = raw_temp / 256.0f; return 0;

// Save a float threshold to NVS esp_err_t my_feature_save_threshold(float thr) It will be your contract with the code

float temperature; if (my_feature_get_temperature(&temperature) == 0) at_reply("%0.2f", temperature); else at_reply_error();

static void at_cmd_temp_handler(at_cmd_ctx_t *ctx, const char *params)

nvs_handle_t h; ESP_ERROR_CHECK(nvs_open("my_feat", NVS_READWRITE, &h)); ESP_ERROR_CHECK(nvs_set_blob(h, "threshold", &thr, sizeof(thr))); ESP_ERROR_CHECK(nvs_commit(h)); nvs_close(h); return ESP_OK;

Write this spec in a short markdown file ( FEATURE_SPEC.md ). It will be your contract with the code. Below is a generic flow; adapt the file names and APIs to the DWI259ETI SDK you have. 4.1 Add New Source Files (or extend existing ones) src/ ├─ feature/ │ ├─ my_feature.c // core logic │ └─ my_feature.h └─ at/ └─ at_cmd_myfeat.c // AT parser glue (if needed) 4.2 Core Logic ( my_feature.c ) #include "my_feature.h" #include "driver/gpio.h" #include "driver/i2c.h" #include "nvs.h" #include "esp_log.h"